FYP S2 WEEK 14

Tittle of activity 

Industry day....demo

Objective :

The day had come!Alhamdulillah I managed to finish my final year project at the desired time. I would like to thank to my fyp supervisor, Mdm zurin as she is helping me so much in developing this project. Not forgotten to my friends that always support me throughout the period until I managed to complete my project.  Here, I attach my fyp poster and demonstration video during industry day ...During the presentation, I used to explained based on the poster that I provide. For my poster, the content includes:

• Introduction
• Objectives
• Abstract 
• Methodology
• Result 
• Reference

My Poster

FYP S2 WEEK 13

Tittle of activity :  POSTER!!!

Objective : Prepare poster for industry day

FYP S2 WEEK 12

Tittle of activity :  Prepare casing & test-run project

Objective :
Build up the car prototype to implement the project.

Content/procedure :

• Casing

1

2

3

4

• Result

FYP S2 WEEK 11

Tittle of activity :  Troubleshoot

Objective :Solve camera prob and LCD

Content/procedure :

1. Because of the camera that  used in my project can't support / match with the computer windows software, I need to downgrade from windows 7 to windows XP. Now my camera can successful function.
2. Change a new LCD according to the damage because of the LCD dint't display the output range and distance.

Before

After

FYP S2 WEEK 10

Tittle of activity :

 Step development basic burning programming

Objective :

To learn and understand better how to burn IC.

Content/procedure :

Step 1:

Launch PIC Kit 2 programming software by Selecting Start > Program > Microchip > PIC Kit 2

The following programming interface appears and notifies that the PIC Kit 2 and target device found and connected. 

Step 2: 

If device is successfully detected, the model name will appeared at “Device Configuration Area” 

Step 3 :

For UIC00A, the “VDD Target” will automatically be 5.0. User should powered +5V to the target PIC. 

Step 4 :

Go to File and select Import Hex. Browse for the Hex file location and open to start import the Hex file.

Step 5:

After Hex file has been successfully imported, the target device can be programmed by clicking on Write. The PIC will be erased and programmed with the new Hex code imported. The operation status will display on the Status Window if writing is successful. 

Step 6:

Push button is a special feature to load Hex file into the target device. Push button can be used after Programmer>Write on PIC kit Button is checked as figure below: 

Step 7:

Pressed push button and the Hex file will automatically program into the target device.

Step 8 :

The program already successful Burning Program.

FYP S2 WEEK 9

Tittle of activity :

PCB fabrication...hardware step development

Objective :

     PCB Drawing: PCB drawing is designed using Protel DXP 2005. Once the PCB layout has been correctly design, it is now prints out the layout on the A4 size transparent OHP paper. Note that, two types of printers are allowed to print the PCB layout, one is laser printer and the other is carbon type of printer such as Photostat machine. Inkjet and dot matrix type of printer will not work.

Content/procedure :

1.    PCB Cutting: Cut photo PCB size according to the film size.

2.    PCB Photo Etching: Expose the photo PCB in photo etching kit for 8-10minutes.

3.    PCB Developing: Wash the PCB using PCB developer (white powder) for 2 min.

4.    Acid Etching: Etching is a process that removes materials from such us unwanted copper from the PCB surface to achieve circuit design requirements. The etching process used in this project is called chemical etch or pattern etch. 

Result:

PCB print layout

Step 1

Step 2

Step 3

Step 4 

FYP S2 WEEK 8

Tittle of activity :

Web cam...test2

Objective :

Modified web cam so that it can connect to main circuit.

Content/procedure :

Tools:

• Soldering gun & lead
• Jumper wire

Step 1:

 

Before modified

Step 2:

Remove the insulation 

Step 3:

Cut the Vcc cable

Step 4:

Connect the cable to jumper wire

Step 5:

Cover it with tape

Step 6:

After, ready connect to main circuit